Tugging strap
This new re-designed (3/25/2024) Restoring tug strap is light weight and will provide the user with a wide range of pulling force.
The tugging strap is used to create tension with the DTR bell or tug bell
![](https://n4i6b0.p3cdn1.secureserver.net/wp-content/uploads/2024/03/Tugging_strap_1-300x166.jpg)
This tug strap setup allows me to use a wide range of tension at multiple anchor points.
![](https://n4i6b0.p3cdn1.secureserver.net/wp-content/uploads/2022/12/Tugging_strap_6-300x208.jpg)
Comes with a foot loop that can be used to anchor the tug strap.
![](https://n4i6b0.p3cdn1.secureserver.net/wp-content/uploads/2024/01/strap_1-300x200.jpg)
The E-strap can be anchored to the foot strap.
![](https://n4i6b0.p3cdn1.secureserver.net/wp-content/uploads/2022/12/brace1-282x300.jpg)
A knee support is another way to anchor the strap.
![](https://n4i6b0.p3cdn1.secureserver.net/wp-content/uploads/2022/12/strapped-277x300.jpg)
I would slide the knee support down onto the shin like you see here.
![](https://n4i6b0.p3cdn1.secureserver.net/wp-content/uploads/2024/03/pin-tagline_here-300x232.jpg)
After I have things adjusted I will take the large safety pin and pin the tag line to lock in my adjustment.
![](https://n4i6b0.p3cdn1.secureserver.net/wp-content/uploads/2024/03/Tugging_strap_2-300x225.jpg)
This is the easiest way I have found to keep my tension locked in place until I want to increase or decrease tension.
![](https://n4i6b0.p3cdn1.secureserver.net/wp-content/uploads/2024/03/Tugging_strap_3-300x166.jpg)
I will pin the tag line here if I am using light to moderate tension.
![](https://n4i6b0.p3cdn1.secureserver.net/wp-content/uploads/2024/03/Tugging_strap_4-300x225.jpg)
If I want a higher amount of tension I will slip the tag line through the clamp.
![](https://n4i6b0.p3cdn1.secureserver.net/wp-content/uploads/2024/03/Tugging_strap_5-300x225.jpg)
Use the safety pin to lock the tag line in place.
-
E-Strap$9.50