Spacers are used to make a Retainer longer. This turns the Retainer into a “packer”. Packing is an old term used for a method of restoring that uses spacers or packing material to extend the length of a device that one is using to restore. This put a slight amount of tension against the glans much like dual tension but on a much less aggressive scale. Set of (2)
Approximately 1/4 inch ( 6 – 7 mm ) and 1/2 inch (12-13mm ) thick. A 1/4 inch hole is drilled through the center and its counter sunk so that the screw head fits flush inside.
Spacers do require Retainer screws in order for them to be attached. You can use steel bolts and screws from a hardware store also.
Handmade in the USA from machined Nylon
